Some handbag auxiliary materials
Updated: Aug 20, 2018
Non - Woven Fabric
it is composed of directional or random fibers, is a new generation of environmental protection materials, with features of moisture-proof, breathable, flexible, light, non-combustible, easy to decompose, non-toxic and non-irritant, low cost and recyclable. The material able to decompose naturally after 90 days outside, but will last up to 5 years inside the handbag or interior. It is widely applied in the handbag industry, and is often used for folding edges, folding Windows, increasing the thickness of the body, adding the feel of the skin, etc., but the non-woven fabric cannot be used for reinforcing.
Good soft and flexibility. Thickness from 0.4mm-2.0mm and size increasing every 0.2mm. Both sides of scrap are fibrous net bottom makes easy to brush and glue, mostly used in PU soft bag of the three-in-one clip and joint, increase thickness and soft feeling. Can't used for reinforcement, hand holding materials and the parts under stress.
One side is glue bottom, another side is fiber net bottom. Common scrap flexibility are divided into three types: soft, medium and hard. Thickness from 0.4mm-2.0mm, and specification are increasing every 0.2mm. Mainly used for ear pocket, handle bar, pocket bottom, inner patch and large surface fitting, etc. The ear pocket is mostly used for PU bag, and the thickness is 0.4mm-0.6mm, which is not recommended for genuine leather. The handling bar can be used for PU, leather, canvas bags, etc. The thickness are 0.6mm-0.8mm.
On one side is a elastic density glue bottom. Another side is a fibrous net bottom. Common scrap flexibility are divided into three types: soft, medium and hard. Thickness from 0.4mm-2.0mm, and specification are increasing every 0.2mm. Mainly used for handle, pouch body, internal paste and large surface fitting, etc. Due to high density and good elasticity, Aqueducts Scrap mainly used for middle and high-end handbags and some leather handbag retainer.
Mainly simulates the composition and structure of natural leather. Usually the impregnated non - woven fabric is used as reticular layer and the microporous polyurethane layer is used as granular layer. It is very similar to leather and has a certain air permeability, which is closer to natural leather than ordinary artificial leather. Due to the excellent elasticity and softness, it is mainly used for the front and back width of high-grade bags, and the cross-head interior to increase the feel, and the thickness should be 0.6mm-0.8mm.
Less softness, good elasticity, strong strength. Mainly used for structure bag stiffening.
Is a auxiliary material widely used in leather products, leather shoes and furniture. As an intermediate layer, bonded leather replaces the cardboard with its unparalleled texture, elasticity, toughness, wet-resistant ability and processing adaptability. Used for ear, Angle fitting, edge fitting, inner fitting and so on. Thickness 0.4mm-0.8mm.
Is the best recycled leather, has soft feeling. Belongs to a high grade leather newly developed in synthetic leather. Due to its advantages of abrasion resistance, cold resistance, air permeability, aging resistance, soft texture, environmental protection and beautiful appearance, it has become a private customized high-end product selection. Mainly used as auxiliary material on the large surface of some rare skins and handle bar.